WARNING: This product contains nicotine.
Nicotine is an addictive chemical. Our products are restricted to adults 21+ only.
YES (21+)
By entering this website, you certify that you are of legal smoking age in the state in which you reside
eGrip II Body
eGrip II Battery
eGrip II, a new version of eGrip, is more elegant and more handsome in appearance. It applies the new V4.03 firmware with RTC(Real Time Clock) display. TFTA-Tank technology and the dual battery protection system are built in one device. Large 0.96 inch OLED screen, clock screen protection and multiple tank light colors all make it more practical and attractive catering to your preference. Also, upgradable firmware always enables it up-to-date.
eGrip II Battery
Standard Configuration:

1 * eGrip II
1 * USB Cable
1 * Manual
1 * Warranty Card
eGrip II Battery
Size: 24.00*45.00*99.00mm
Output Mode: RTC/VW/VT(Ti, Ni, SS316)/Bypass/TCR(M1, M2, M3)
Output Wattage: 1-80W
Resistance Range: 0.05-1.5ohm for VT mode
Resistance Range: 0.1-3.5ohm for VW/BYPASS mode
Temperature Range: 100-315°C/ 200-600°F
Colors: Sliver, Black, Red, Grey, White, Gold
eGrip II applies RTC(Real Time Clock) display
RTC--Real Time Clock enables eGrip II to present you time in two kinds of method.
A. In general interface, it presents both Dial Display and Numerical Display.
B. In screen protection, it shows you real time in Dial Display.
Dual Circuit Protection
eGrip II applies two sets of battery protection circuit system, realizing overall battery protection of over-charging,
over-current and over-discharging, which makes it more safe and reliable.
eGrip II Battery
TFTA-Tank of All-in-One device
TFTA-Tank technology, which means Top Filling and Top Airflow, enables the top section and coil to be removed
and as one solid unit, presenting you eGrip II of All-in-One style with evolve and improvement.
Coil replacement and juice fill can be achieved by removing this top section from the cup.
eGrip II Battery
Fashionable Tank Lights
Multiple colors of tank lights make eGrip II more attractive and fashionable catering to your preference.
eGrip II Battery
Apply the Atomizer Adapter Unscrew the mouthpiece base, and screw the atomizer adapter tightly with a tool (coin),
then you can apply other types of atomizer with eGrip II
eGrip II Battery
Firmware Upgradeable
eGrip II comes with the upgradeable firmware.
Having Version 4.00 for Cuboid Mini, new interface, multiple modes and functions are available.
eGrip II Battery
Charging & Upgrading
The micro USB port is on the top of the left side. Connect it with a micro USB cable to charge or upgrade your device. Simply charge eGrip II by connecting it with
the wall adapter or a computer via USB cable. The battery is charged as shown in the picture. When it is fully charged, the charging bar will disappear.
eGrip II Battery