Delta II VT atomizer, based on original Delta II atomizer, has
two types of heating wires: Ti (Titanium) and Ni (Nickel 200),
respectively supporting VT-Ti (Titanium)/ VT-Ni (Nickel) modes when
applying with device of Variable Temperature Control System.
Parameter & Recommendation:
LVC-Ni (Nickel 200)
Diameter of Ni: 0.25mm
Resistance: 0.3Ω
Temperature recommended: 500-550˚F
Summit wattage: 60W
LVC-Ti (Titanium)
Diameter of Ti: 0.4mm
Resistance: 0.5Ω
Temperature recommended: 450-500˚F
Summit wattage: 60W
Product Parameters:
Delta II Atomizer: Height: 70.5mm
Diameter: 22mm
Capacity: 3.5ml
Mouthpiece: 10.0mm*17.0mm
Standard configuration:
1× Delta Ⅱ Mouthpiece
1× Delta Ⅱ Tube
1× Delta Ⅱ Base
1* LVC-Ni head 0.3 ohm
1× Delta II LVC head(0.5ohm)
Create large vapor
All-metal top to bottom, being stainless and anti-corrosive, plus three glass transparent windows.
Adjustment of Airflow
Rotate the ring on the atomizer base clockwise or counterclockwise to adjust the inlet valve.
E-juice filling
Unscrew the atomizer tube from the Delta Ⅱ base. Simply
refill e-Liquid into the hole from the bottom along the inwall of Delta Ⅱ
tube.
Note:
1.Please DO NOT refill the e-liquid into the small hole in the center of the atomizer tube.
2.When you unscrew the Delta Ⅱ base from the atomizer tube,
the atomizer head may become loose, so do remember to tighten it before
re-screw the atomizer base on the tube.
Replacement of Atomizer Head
Unscrew the atomizer cone, the atomizer head is located on the base, just unscrew it and replace a new one.