HOME > Support

Latest Version: (VT Software1.20)
Firmware V3.05



Date Updated: May 23, 2017

Previous Updates:
Firmware V5.04

Firmware V3.04

Firmware V3.03

Firmware V3.02

Firmware V3.01

Firmware V3.0

Firmware V2.0

Firmware V1.30

Firmware V1.20

Firmware V1.10

Firmware V1.02

License: Software
Support: win10/win8/win7/XP/Mac

VT Software to Upgrade eVic-VTC Mini

This VT software is for upgrading your eVic-VTC Mini to the latest Firmware. Your temperature control device will be always up to date because of upgradeable firmware.

What’s new in Version 3.05?
Adjustable Timeout Duration
For safety concerns, if you hold the fire button over a certain time, the device will shut down automatically. Press the fire button 5 times to turn it on again.
Due to different vaping habits, you’re allowed to set the timeout duration from 5 to 15 seconds as you prefer. Hold the fire button and “+” button simultaneous to active the menu. Press the “+” button 2 times to shift to timeout set interface. Press the “-” button to set the timeout duration. Press the fire button to confirm.

Check Preheat Status With Ease
We made it easier to check the preheat status. When the preheat function is on, the wattage icon will be turned reversed to indicate that your preheat is now on. The “W” icon will turned back to normal when you turn the preheat function off.

Previous updates
Preheat Function Available
We listened to our fans about adding the preheat into our existing firmware upgradeable devices. And now, the preheat function is available. This is especially an essential when using an RDA, RTA, ceramic heads and so on.

Simply long press the fire button and “+” regulate button simultaneously to enter into the regulation interface. Then press the “+” button 2 times to enter into Preheat Setting Menu1. Press the fire button to switch between preheat power and preheat duration. Press “+” or “-” buttons to regulate. Long press the fire button to confirm.
1: When you enter into the preheat menu, press the “-” button first then to regulate the preheat power and duration.

Simplified New Interface
We redesigned the user interface based on the creatives by our fans. It is simple and clear with all the essential elements on display.

Game Mode
We added the new Game Mode on Version 3.03 in order to bring more fun to you.
Simply press the fire button and right regulatory button simultaneously to enter into the menu regulation interface1. Then press the right regulatory button again to enter into the Game Mode menu2 directly. Choose Easy, Normal or Hard level and press the fire button to start the game. Press the fire button and right regulatory button simultaneously to exit.

Custom Logo
Users can upload custom logos onto your eVic-VTC Mini. The logo should be single color bmp. picture with limited 64*40 pixel.

How to achieve?
1. Download the new VT Software 1.20 and upgrade your eVic-VTC Mini to firmware V3.02 or higher version first.
2. Upload the logo you prepared.
3. Press the fire button and right regulatory button simultaneously to enter into the on/off menu of custom logo function. Then you’re ready to enjoy it.

Modes Shift Adjustment
On the new firmware V3.02, we made a slight change to the modes shifting. In the main menu, we’re now having TEMP, TCR, POWER, BYPASS and START modes.
We integrate normal VT modes (Temp Ni, Temp Ti, Temp SS316) into the TEMP sub-menu. When you at the sub-menu, just press the Up button to switch among Temp NI, Temp TI, and Temp SS316 modes.
We also changed the display of TCR mode, that is to say, we added the actual TCR value onto the mode display (e.g. TCR 120 M1).

START Mode
We added START Mode for those who are new to the CUBIS and BF heads. You can easily get started. The BF SS-316 and BF Clapton series heads can be applied under this mode. Based on it’s resistance, there will be an recommended output range with the dash line marking the maximum. You can get the best vaping experience when using in this recommended range. Still you can adjust the wattage beyond the range as to your preference.
Note: 1. The Start Mode will automatically save ten groups of output settings. Each resistance contains an output power setting. It can be adjusted and will be saved once you changed the output wattage.
Note: 2. When ten groups of profiles are saved, the first profile will be deleted if a new resistance is added. And it is the same to continue.
Note: 3. On the display, the dash line with the word BF represents the recommended maximum output wattage for current BF atomizer head.


New Interface
Compatible with eVic-VTC Mini, the software to upgrade firmware to 2.0 Version is now available. The 3.0 Version, presents overall information in a more clear, precise and elegant way.

It is newly added with SS316 mode which especially goes with BF SS316 head.
At the same time, in VT mode, the resistance range has upgraded to 0.05-1.5ohm.

And also, it applies TCR(Temperature Coefficient of Resistance) mode for customer to set personal vaping reference going with various coils like NiFe, SS304, SS316 etc., and is comprehensive, cool, and convenient to use.

Here’s the TCR Value Range of eVic-VTC Mini for your reference as follows:

How to use TCR
Note: eVic-VTC Mini can be only upgraded by certain firmware. It is not compatible to firmwares designed for other devices.

How to update firmware of eVic-VTC Mini via Mac
How to update firmware of eVic-VTC Mini via Windows


Age Certification

You must be 18 years old to visit this site.