PLN (In.VAT)

JPY (Ex.VAT)
€ 109
EUR (In.VAT)
$99
USD (Ex.VAT)
 
CUBOID TAP
CUBOID TAP
TAPTECTM technology changes what matters
We historically removed the physical regulatory buttons, instead, we creatively bring you the new Joyetech
TAPTECTM technology. Simply tap the panel, then it's all under your control.
CUBOID TAP
CUBOID TAP
Innovation never stops. Introducing the much anticipated CUBOID TAP furnished with Joyetech TAPTECTM technology. We creatively developed the TAP buttons, paired with the pressure-sensitive system and vibration motor. It is equipped with a 1.3 inch OLED display, allowing for easily monitor and modify with ease. CUBOID TAP is powered by dual replaceable 18650 cells with which you can fire it up to the ultra 228W. Featuring the charging balance system, it supports a 2.0A quick charge capability, providing a faster charging resolution. The CUBOID TAP is a stunning, powerful and feature-rich masterpiece that is supported by a series of safety protections. It is backed with upgradeable firmware and multiple functions such as clock, custom logo, preheat and reverse charging. With the new TAP buttons, the CUBOID TAP will redefine what you can expect out of your vaping.
CUBOID TAP
Standard Configuration:

1 * CUBOID TAP (no cell)
1 * QC USB Cable
1 * Manual
1 * Warranty Card
1 * Warning Card
CUBOID TAP
Parameter:
Size: 28.0mm*41.0mm*86.0mm
Colors: silver, black, red, yellow, blue
Weight: 120.5g (without cell)
Output mode: Power/Clock/Temp (Ni, Ti, SS316)/TCR (M1/M2/M3)/USB Charge mode
Features: TAPTECTM, pressure-sensitive, vibration motor, 2A QC, power bank, preheat, custom logo, real-time clock
Output range: 1-228W
Depth of 510 pins applicable: 4.0-5.5mm
Resistance range: 0.05-1.5ohm under Temp/TCR mode
Resistance range: 0.1-3.5ohm under Power/Clock mode
Temperature control: 100-315°C/ 200-600°F
Battery using: dual married high-rate 18650 cells
Battery using: (continues discharge current 25A)
Max charging current: 2.0A
Max output current: 50A
Pressure-sensitive capability applied

Thanks to the advanced technology in our time. The CUBOID TAP adopted the pressure-sensitive system inside, with which you can active the menu by clutching the device in sequence.
Power on condition:
3 times to lock/unlock tap buttons
4 times to activate the menu
5 times to turn stealth on/off

Power off condition:
3 times to set TCR value
4 times to turn screen upside down
5 times to check battery voltage
CUBOID TAP
CUBOID TAP
CUBOID TAP
Vibrates once taps

The vibration motor is built in such a way that it is partially off-balanced.
Once you tap the panel, it vibrates to indicate that the adjustment is made.
CUBOID TAP
Vape in a safe way

For safety reasons, if you hold the fire button for 10 seconds, the device will shout down automatically. Press the fire button 5 times to turn it on again.
228W with 50A maximum output current
The CUBOID TAP is powered by dual 18650 high-rate batteries where max output can be reached to 228W.
It offers more possibilities when using various coils with its 50A maximum output current.
CUBOID TAP
Equalizing charge system
Equalizing charge technology was applied in order to bring all cells to an equal state of charge.
CUBOID TAP
Innovative buck-boost technology
The CUBOID TAP adopts the innovative buck-boost technology to provide much steadier output power.than normal ones when using the Avatar quick charger (sell separately).
CUBOID TAP
Quick charge system
The CUBOID TAP has 2.0A maximum charging current with which it can get fully charged more quickly than normal ones when using the Avatar quick charger (sell separately).
CUBOID TAP
Power bank for reverse charge

The CUBOID TAP can be served as a power bank to charge other e-cigarettes or electronic devices. Install the new reverse charging adapter (sell separately) on the 510 connector.
CUBOID TAP
CUBOID TAP Onboard reverse polarity protection

The onboard reverse polarity protection protects the device from damage in the event of reverse battery installation.
Dual circuit protection

It applies two sets of battery protection circuit system, realizing overall battery protection of over-charging, over-current and over-discharging, which makes it more safe and reliable.
CUBOID TAP
CUBOID TAP
Applicable for various tanks

The exquisite spring loaded 510 connector of the CUBOID TAP is applicable for tanks with 510 length ranged at 4.0mm to 5.5mm.Tanks are also free to go up to 25mm diameter as you prefer.
Upgradeable firmware

CUBOID TAP comes with the upgradeable firmware.
Having the latest firmware, real-time clock, preheat, custom logo, and reverse charging are all available.
CUBOID TAP
CUBOID TAP
Charging
Please always use married high-rate 18650 cells, don't mix with different brands. The CUBOID TAP adopts new equalizing charge system which
supports quick charge capability with max charging current up to 2.0A. You can also take out the cells and charge them in a stand alone charger.
CUBOID TAP

Age Certification

You must be 18 years old to visit this site.