detail - Joyetech Electronic Cigarette

CUBIS Pro Mini atomizer perfectly fits the eVic Basic which supports the new preheat, custom logo and RTC (Real Time Clock) functions. The eVic Basic has the upgradeable firmware with maximum output updating to 60W. It especially comes with the new colorful wrinkle paintings which has a remarkably deep rich texture. E-juice filling can be easily achieved by simply removing the top cap and injecting into the side holes. The innovative CUBIS Pro Mini with leak resistant cup design allows you to enjoy the best vaping experience ever.

Standard Configuration:
1 * eVic Basic 60W Battery
1 * CUBIS Pro Mini Atomizer
1 * BF SS316-0.5ohm DL.
1 * LVC Clapton-1.5ohm MTL.
1 * USB Cable
2 * User Manual
1 * Warranty Card
1 * Warning Card

Specification:

Size: 22.00*32.00*97.00mm
Battery Capacity: 1500mAh
Output Mode: RTC/VT (Ni/Ti/SS316)/VW/TCR/BYPASS Modes
Output Wattage: 1-60W
e-Juice Capacity: 2ml
Resistance Range: 0.05-1.5ohm for VT/TCR mode
Resistance Range: 0.1-3.5ohm for VW/BYPASS mode
Temperature Range: 100-315°C/ 200-600°F
Colors: Blue Wrinkle, Red Wrinkle, Orange Wrinkle, Black Wrinkle

New wrinkle finishes

The new wrinkle finish with its deep texture was achieved through a remarkably precise treatment. The end result
is so purely and continuously soft beyond imagination.

Preheat function

Basically, the preheat function allows the device to run at a higher wattage to heat up the coil instantly prior to its normal use.
This is especially an essential when using an RDA, RTA, ceramic heads and so on. It can also prolong the coil's life and achieve a better taste.

Compact size, powerful output (60W)

The eVic Basic comes with a tiny size which is easy to grip.
Maximum output can be reached to 60W with the latest firmware V4.14.

Innovative Leak Resistant Cup Design

The completely leak resistant cup-style tank reservoir allows the top section and coil to be removed and as one solid unit.
Coil replacement and juice fill can be achieved by removing this top section from the cup.

Detachable and Washable Structure

With its special structure, CUBIS Pro Mini atomizer can be easily detached and is able to wash separately.

SS316 0.5ohm DL. and LVC Clapton-1.5ohm Heads

SS316 0.5ohm DL. head can be used under Temp SS316 mode, VW mode and TCR mode as you prefer.

LVC (Liquid Valve Control) Clapton-1.5ohm head applies the liquid valve control system. Simply rotate the ring on the base to adjust the valve.

Dual Circuit Protection

eVic Basic applies two sets of battery protection circuit system, realizing overall battery protection of
over-charging, over-current and over-discharging, which makes it more safe and reliable.

Firmware Upgradeable

eVic Basic comes with the upgradeable firmware.
Having the latest Version 4.14, new interface and preheat function are available.

Exquisite 510 Stainless Steel Thread Applied with 510 stainless steel thread and wide border fitting for large capacity atomizers.

Bottom Ventilation Holes

The ventilation holes are placed on the bottom which can greatly help the device for better heat dissipation.

Charging & Upgrading

Simply connect the device with a micro USB cable to charge or upgrade your device. When it's fully charged, the charging indicator will go out.

CUBIS Pro Mini atomizer adopts top filling and top airflow structure which enables you to refill the e-juice with great convenience.
	Simply uninstall the top cap from the airflow ring, then inject the e-juice into the two side holes (not the vent pipe) directly.